Posts: 2
Threads: 1
Joined: Sep 2012
I am so grateful for the help on getting Stuffit 5 archives to work with Hashcat from matrix https://github.com/hashcat/hashcat/issues/2698
It was 8 and a half years ago I started down the road to getting this format supported https://hashcat.net/forum/thread-1558.html and while I learned enough to make my own solution using MaskProcessor from your toolset, the MH/s of the real deal is outstanding vs. my cobbled together solution.
I've learned a lot in the middle years, and am so happy to have the power of Hashcat to crack these files, which while niche to an audience of 80s-90s-early 2000s Mac users, has helped dozens of them who came to me for help.
Now I can look forward to trying to decipher Stuffit 4 and Stuffit X ones! Maybe someday I'll see if we can get Stuffit 4 in as well.
Thanks so much matrix, and everyone behind the project!
Posts: 1
Threads: 0
Joined: May 2021
Give you a run down of my problem I was mining alt coin called pirl ,, they changed everything 2 years after i stop mining, when they changed everything they want a password for my utc file the problem is i dont even remember making a password for this wallet at all, when i try the ?a?a?a i get error after 9 ?a... i am not a hacker or never want to be one so all this stuff does not make sense to me ,, all i want is to crack the password so i can transfer my coins to a wallet i wrote down my password on...
because i dont remember making a password i did not think doing the wordlist would work for me , but i also have no idea what i am doing ,, if someone that knows alot about this stuff could help . and also i am only getting like 1h/s when doing the ?a?a?a
Thanks so much to who ever helps me out
Posts: 39
Threads: 1
Joined: Jan 2019
Thank you all for this hard work!
Posts: 7
Threads: 1
Joined: May 2021
Posts: 5,185
Threads: 230
Joined: Apr 2010
Just released minor hashcat update to v6.2.2.
If you're interested in the full release notes refer to docs/changes.txt.
The next major update v6.3.0 will contain a list of all changes from 6.2.0 -> 6.3.0.
Posts: 1,042
Threads: 2
Joined: Jun 2017
Another step forward. Thanks for your work.
Posts: 5,185
Threads: 230
Joined: Apr 2010
Just released minor hashcat update to v6.2.3.
This release adds an entire new compute backend (HIP), CPU hardware monitor support, several new hash-modes, bug fixes and improvements.
If you're interested in the full release notes refer to docs/changes.txt.
The next major update v6.3.0 will contain a list of all changes from 6.2.0 -> 6.3.0.
Posts: 1
Threads: 0
Joined: Jul 2021
07-17-2021, 03:06 PM
(This post was last modified: 07-17-2021, 03:12 PM by elma.)
i couldnt make it work with wsl2 + cuda. doesnt seem to find the cuda driver but it works on tensorflow. also cuda works ok on other apps.
cuInit(): no CUDA-capable device is detected
Code: CUDA Device Query (Runtime API) version (CUDART static linking)
Detected 1 CUDA Capable device(s)
Device 0: "NVIDIA GeForce GTX 1650"
CUDA Driver Version / Runtime Version 11.4 / 11.4
CUDA Capability Major/Minor version number: 7.5
Total amount of global memory: 4096 MBytes (4294967296 bytes)
(016) Multiprocessors, (064) CUDA Cores/MP: 1024 CUDA Cores
GPU Max Clock rate: 1560 MHz (1.56 GHz)
Memory Clock rate: 4001 Mhz
Memory Bus Width: 128-bit
L2 Cache Size: 1048576 bytes
Maximum Texture Dimension Size (x,y,z) 1D=(131072), 2D=(131072, 65536), 3D=(16384, 16384, 16384)
Maximum Layered 1D Texture Size, (num) layers 1D=(32768), 2048 layers
Maximum Layered 2D Texture Size, (num) layers 2D=(32768, 32768), 2048 layers
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total shared memory per multiprocessor: 65536 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 1024
Maximum number of threads per block: 1024
Max dimension size of a thread block (x,y,z): (1024, 1024, 64)
Max dimension size of a grid size (x,y,z): (2147483647, 65535, 65535)
Maximum memory pitch: 2147483647 bytes
Texture alignment: 512 bytes
Concurrent copy and kernel execution: Yes with 2 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support: Disabled
Device supports Unified Addressing (UVA): Yes
Device supports Managed Memory: Yes
Device supports Compute Preemption: Yes
Supports Cooperative Kernel Launch: Yes
Supports MultiDevice Co-op Kernel Launch: No
Device PCI Domain ID / Bus ID / location ID: 0 / 1 / 0
Compute Mode:
< Default (multiple host threads can use ::cudaSetDevice() with device simultaneously) >
deviceQuery, CUDA Driver = CUDART, CUDA Driver Version = 11.4, CUDA Runtime Version = 11.4, NumDevs = 1
Result = PASS
Code: Sat Jul 17 16:12:21 2021
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.50 Driver Version: 471.21 CUDA Version: 11.4 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|===============================+======================+======================|
| 0 NVIDIA GeForce ... Off | 00000000:01:00.0 Off | N/A |
| N/A 49C P8 1W / N/A | 134MiB / 4096MiB | ERR! Default |
| | | N/A |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+
Posts: 5,185
Threads: 230
Joined: Apr 2010
Just released minor hashcat update to v6.2.4.
This release adds performance improvements, a new rule-engine function, several new hash-modes, and bug fixes.
If you're interested in the full release notes refer to docs/changes.txt.
The next major update v6.3.0 will contain a list of all changes from 6.2.0 -> 6.3.0.
Posts: 1,042
Threads: 2
Joined: Jun 2017
Great, thanks for your excellent work.
BTW:
WPA users should read this thread:
https://hashcat.net/forum/thread-10253.html
|