Sapphire r9 290x 4gb
#1
After finally getting the funds in order i built my self a little machine nothing to special but does they job for me.
I have been doing a few test's over last few day's and it seems ok so far, but i noticed something on the bench mark test i did.
WHere it says
Code:
Device #1: Hawaii, 3072MB

Shouldn't it be
Code:
Device #1: Hawaii, 4032MB,

Spec's and benchmark results

http://i.imgur.com/e9q9rGv.png

Benchmark result's
Code:
Display Driver version    14.301.1001.0
BIOS Version    113-C6710100-102

PS F:\oclHashcat-1.36> ./oclHashcat64.exe -b
oclHashcat v1.36 starting in benchmark-mode...

Device #1: Hawaii, 3072MB, 1000Mhz, 44MCU

Hashtype: MD4
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 22113.8 MH/s

Hashtype: MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 11055.6 MH/s

Hashtype: SHA1
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3968.8 MH/s

Hashtype: SHA256
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1433.4 MH/s

Hashtype: SHA384
Workload: 256 loops, 256 accel

Speed.GPU.#1.:   530.4 MH/s

Hashtype: SHA512
Workload: 256 loops, 256 accel

Speed.GPU.#1.:   532.6 MH/s

Hashtype: SHA-3(Keccak)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   247.8 MH/s

Hashtype: RipeMD160
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  2327.4 MH/s

Hashtype: Whirlpool
Workload: 512 loops, 32 accel

Speed.GPU.#1.:   129.9 MH/s

Hashtype: GOST R 34.11-94
Workload: 512 loops, 64 accel

Speed.GPU.#1.:   157.6 MH/s

Hashtype: SAP CODVN B (BCODE)
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:   948.3 MH/s

Hashtype: SAP CODVN F/G (PASSCODE)
Workload: 512 loops, 32 accel

Speed.GPU.#1.:   225.7 MH/s

Hashtype: SAP CODVN H (PWDSALTEDHASH) iSSHA-1
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:  2363.8 kH/s

Hashtype: Lotus Notes/Domino 5
Workload: 128 loops, 32 accel

Speed.GPU.#1.:   192.9 MH/s

Hashtype: Lotus Notes/Domino 6
Workload: 128 loops, 32 accel

Speed.GPU.#1.: 34035.1 kH/s

Hashtype: Lotus Notes/Domino 8
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:   294.0 kH/s

Hashtype: SHA-1(Base64), nsldap, Netscape LDAP SHA
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3921.8 MH/s

Hashtype: SSHA-1(Base64), nsldaps, Netscape LDAP SSHA
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3913.4 MH/s

Hashtype: descrypt, DES(Unix), Traditional DES
Workload: 128 loops, 64 accel

Speed.GPU.#1.:   157.4 MH/s

Hashtype: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:  4778.3 kH/s

Hashtype: sha256crypt, SHA256(Unix)
Workload: 1024 loops, 4 accel

Speed.GPU.#1.:   157.2 kH/s

Hashtype: sha512crypt, SHA512(Unix)
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:    70337 H/s

Hashtype: bcrypt, Blowfish(OpenBSD)
Workload: 32 loops, 2 accel

Speed.GPU.#1.:     7193 H/s

Hashtype: LM
Workload: 128 loops, 256 accel

Speed.GPU.#1.:  1999.3 MH/s

Hashtype: NTLM
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 21342.3 MH/s

Hashtype: DCC, mscash
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  5641.1 MH/s

Hashtype: NetNTLMv1-VANILLA / NetNTLMv1+ESS
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 11603.7 MH/s

Hashtype: NetNTLMv2
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   752.9 MH/s

Hashtype: Kerberos 5 AS-REQ Pre-Auth etype 23
Workload: 128 loops, 32 accel

Speed.GPU.#1.: 54525.3 kH/s

Hashtype: EPiServer 6.x < v4
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2834.2 MH/s

Hashtype: EPiServer 6.x > v4
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1239.1 MH/s

Hashtype: MSSQL(2000)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3894.3 MH/s

Hashtype: MSSQL(2005)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3900.5 MH/s

Hashtype: MSSQL(2012)
Workload: 256 loops, 256 accel

Speed.GPU.#1.:   530.5 MH/s

Hashtype: MySQL323
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 25764.8 MH/s

Hashtype: MySQL4.1/MySQL5
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1643.7 MH/s

Hashtype: Oracle 7-10g
Workload: 128 loops, 64 accel

Speed.GPU.#1.:   849.8 MH/s

Hashtype: Sybase ASE
Workload: 512 loops, 32 accel

Speed.GPU.#1.:   165.9 MH/s

Hashtype: Oracle 11g/12c
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3916.1 MH/s

Hashtype: PostgreSQL Challenge-Response Authentication (MD5)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2884.5 MH/s

Hashtype: MySQL Challenge-Response Authentication (SHA1)
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  1039.7 MH/s

Hashtype: OSX v10.4, v10.5, v10.6
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2839.6 MH/s

Hashtype: OSX v10.7
Workload: 256 loops, 256 accel

Speed.GPU.#1.:   504.4 MH/s

Hashtype: OSX v10.8+
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:     1064 H/s

Hashtype: Android PIN
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:  1634.2 kH/s

Hashtype: Android FDE <= 4.3
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:   362.9 kH/s

Hashtype: scrypt
Workload: 1 loops, 64 accel

Speed.GPU.#1.:   684.3 kH/s

Hashtype: Cisco-PIX MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  7253.1 MH/s

Hashtype: Cisco-ASA MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  6773.6 MH/s

Hashtype: Cisco-IOS SHA256
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1421.6 MH/s

Hashtype: Cisco $8$
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:    31986 H/s

Hashtype: Cisco $9$
Workload: 1 loops, 4 accel

Speed.GPU.#1.:     4745 H/s

Hashtype: Juniper IVE
Workload: 1000 loops, 32 accel

Speed.GPU.#1.:  4764.2 kH/s

Hashtype: Citrix NetScaler
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3061.7 MH/s

Hashtype: DNSSEC (NSEC3)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1341.3 MH/s

Hashtype: WPA/WPA2
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:   179.5 kH/s

Hashtype: IKE-PSK MD5
Workload: 256 loops, 128 accel

Speed.GPU.#1.:   802.8 MH/s

Hashtype: IKE-PSK SHA1
Workload: 256 loops, 128 accel

Speed.GPU.#1.:   374.3 MH/s

Hashtype: Password Safe v2
Workload: 1000 loops, 16 accel

Speed.GPU.#1.:   149.8 kH/s

Hashtype: Password Safe v3
Workload: 1024 loops, 16 accel

Speed.GPU.#1.:   648.5 kH/s

Hashtype: 1Password, agilekeychain
Workload: 1000 loops, 64 accel

Speed.GPU.#1.:  1467.6 kH/s

Hashtype: 1Password, cloudkeychain
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:      930 H/s

Hashtype: AIX {ssha1}
Workload: 64 loops, 128 accel

Speed.GPU.#1.: 20098.1 kH/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES
Workload: 1024 loops, 64 accel

Speed.GPU.#1.:   541.4 kH/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-SHA512 + AES
Workload: 1000 loops, 16 accel

Speed.GPU.#1.:    75270 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-Whirlpool + AES
Workload: 1000 loops, 8 accel

Speed.GPU.#1.:    21512 H/s

Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES + boot-mode
Workload: 1000 loops, 64 accel

Speed.GPU.#1.:  1071.6 kH/s

Hashtype: Office 2007
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:    58664 H/s

Hashtype: Office 2010
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:    29298 H/s

Hashtype: Office 2013
Workload: 1024 loops, 4 accel

Speed.GPU.#1.:     4124 H/s

Hashtype: MS Office <= 2003 MD5 + RC4, oldoffice$0, oldoffice$1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.: 54552.6 kH/s

Hashtype: MS Office <= 2003 SHA1 + RC4, oldoffice$3, oldoffice$4
Workload: 1024 loops, 32 accel

Speed.GPU.#1.: 59972.4 kH/s

Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:   136.2 MH/s

Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) + collider-mode #1
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:   149.8 MH/s

Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) + collider-mode #2
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  2944.4 MH/s

Hashtype: PDF 1.4 - 1.6 (Acrobat 5 - 8)
Workload: 70 loops, 256 accel

Speed.GPU.#1.:  6697.0 kH/s

Hashtype: PDF 1.7 Level 3 (Acrobat 9)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1420.0 MH/s

Hashtype: PDF 1.7 Level 8 (Acrobat 10 - 11)
Workload: 64 loops, 8 accel

Speed.GPU.#1.:     6550 H/s

Hashtype: Drupal7
Workload: 1024 loops, 8 accel

Speed.GPU.#1.:    26121 H/s

Hashtype: HMAC-MD5 (key = $pass)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1580.1 MH/s

Hashtype: HMAC-MD5 (key = $salt)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  3106.5 MH/s

Hashtype: HMAC-SHA1 (key = $pass)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   770.9 MH/s

Hashtype: HMAC-SHA1 (key = $salt)
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1518.2 MH/s

Hashtype: HMAC-SHA256 (key = $pass)
Workload: 256 loops, 128 accel

Speed.GPU.#1.:   338.2 MH/s

Hashtype: HMAC-SHA256 (key = $salt)
Workload: 256 loops, 128 accel

Speed.GPU.#1.:   566.9 MH/s

Hashtype: HMAC-SHA512 (key = $pass)
Workload: 128 loops, 128 accel

Speed.GPU.#1.: 39235.4 kH/s

Hashtype: HMAC-SHA512 (key = $salt)
Workload: 128 loops, 128 accel

Speed.GPU.#1.: 78715.9 kH/s

Hashtype: IPMI2 RAKP HMAC-SHA1
Workload: 512 loops, 256 accel

Speed.GPU.#1.:   763.1 MH/s

Hashtype: Half MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  6334.4 MH/s

Hashtype: Double MD5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2685.4 MH/s

Hashtype: GRUB 2
Workload: 1024 loops, 2 accel

Speed.GPU.#1.:     3723 H/s

Hashtype: phpass, MD5(Wordpress), MD5(phpBB3), MD5(Joomla)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  2770.7 kH/s

Hashtype: SIP digest authentication (MD5)
Workload: 1024 loops, 32 accel

Speed.GPU.#1.:  1386.9 MH/s

Hashtype: SipHash
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 16999.7 MH/s

Hashtype: Joomla < 2.5.18
Workload: 1024 loops, 256 accel

Speed.GPU.#1.: 10918.0 MH/s

Hashtype: osCommerce, xt:Commerce
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  6103.9 MH/s

Hashtype: PrestaShop
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  3532.4 MH/s

Hashtype: IPB2+, MyBB1.2+
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1994.1 MH/s

Hashtype: vBulletin < v3.8.5
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2680.7 MH/s

Hashtype: PHPS
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2694.8 MH/s

Hashtype: vBulletin > v3.8.5
Workload: 512 loops, 256 accel

Speed.GPU.#1.:  1926.9 MH/s

Hashtype: SMF > v1.1
Workload: 1024 loops, 256 accel

Speed.GPU.#1.:  2867.6 MH/s

Started: Sat Jun 06 17:27:50 2015
Stopped: Sat Jun 06 17:58:55 2015



I'm not sure if the speeds are fast for the card, but it does me.
I am new to all this so it could all be working as it should, got to check these these out last thing i need is it blowing up.
PS why no spoiler tags.

Thanks very much.
My full build @instagram
#2
I use the same gpu, Ive got 5 of them.
I get the same speeds as you on wpa2 with the basic command, but if add -n 32 to the command it goes from 179 kh/s to 189 - 190kh/s.

Also I have read someone managed to get over 200 kh/s by adding the --gpu-loops command but it didn't work for me.
#3
The reported memory is fine. Not all of the memory is available for compute tasks.
#4
(06-08-2015, 04:03 PM)smokey Wrote: I use the same gpu, Ive got 5 of them.
I get the same speeds as you on wpa2 with the basic command, but if add -n 32 to the command it goes from 179 kh/s to 189 - 190kh/s.

Also I have read someone managed to get over 200 kh/s by adding the --gpu-loops command but it didn't work for me.

5 wow, i would love that many. You got any pics?
Its sitting at about 165 now which i'm happy with.


(06-08-2015, 08:02 PM)epixoip Wrote: The reported memory is fine. Not all of the memory is available for compute tasks.

ok thanks for that good to know, i just need to keep an eye the 80oc temp might need some more cooling i think.
#5
Are you manually setting your fan to 90-100%?
#6
(06-08-2015, 08:50 PM)epixoip Wrote: Are you manually setting your fan to 90-100%?

Nope i let it control it's self, if it goes above 80oC fan kicks in and brings it down.
wasn't sure if it's best idea to have fan blasting constantly at 90-100%
#7
It's a really bad idea to let the BIOS manage the fan speed automatically, because it's programmed for gaming workloads, not compute workloads. You really must set the fan speed manually. Yes, it's okay to have the fan run at full speed.
#8
Add --gpu-temp-retain=20, that will keep the fans at 100% throughout an attack.
#9
With lower temperatures slow down the natural deterioration of hardware, so setting the fans to maximum is a good idea.